Master Mode
Master Mode Page 1
11-1
Chapter 11
Master Mode
Press the Master mode button to enter Master mode, which contains parameters affecting the
PC3’s overall performance.
When you exit Master Mode it saves a Master Table (unless MasterTableLock is On — more on
this later) which is basically the state of the PC3, so it will remember what programs are
assigned to what Channels and such. Explicit saving of the Master Table is also possible.
You can also enter the Boot Loader via Master Mode.
The Clock in the system will time- stamp your files if you set it correctly. Reset will delete all of
your User objects. The Digital Out Mode goes up to 192K and Syncs to External Clock.
Also on the Master mode page is General MIDI Mode. Check www.kurzweilmusicsystems.com
for more info.
Master Mode Page 1
On the Master mode page you’ll find parameters for setting the overall tuning and transposition
of the PC3, sampling rate for digital output, and for several keyboard and programming
adjustments.
Parameter Range of Values Default
Tune ± 100 cents 0
Transpose -128 to 127 semitones 0
Buttons Mode Off, On Off
Drum Remap None, GM None
Digital Output Digital Output List 48 KHz
Aux Out Pair Mode Normal, Mirror Primary Outputs Normal
Tempo 20.00 to 300.00 BPM 120.00
Clock Source Internal, External Internal
Output Clock Off, On Off
Digital Output Volume Variable, Fixed Variable
To Next Page
Loading...
