12-8
Song Mode and the Song Editor
Song Mode: The FX Pages
When recording beyond your initially specified Song End point, you’ll notice that the Song End
location automatically moves and rounds to the next bar, so as to always be ahead of the
playhead. It is possible to move the Song End point to a location before other MIDI events (i.e.,
in the middle of the current song)—the sequencer will ignore (but not delete) events after this
point.
Loop
With the Loop parameter set to Loop, the sequencer will loop the segment of the song between
Time In and Time Out.
Punch
With the Punch parameter set to Punch, the sequencer (in RECORDING mode) will record
events only between Time In and Time Out.
Metro
The Metro parameter determines the recording modes in which the metronome will play. With
Metro set to Rec, the metronome only plays while recording is in progress. With Metro set to
Always, the metronome plays during playback and recording. With Metro set to Off, the
metronome doesn't play at all.
Song Mode: The FX Pages
The four Song mode FX pages—FX, AUXFX1, AUXFX2, and MASTFX—work the same way as
the Effects mode pages—CHANFX, AUXFX1, AUXFX2, and MASTER. See the Effects mode
chapter for information on editing these pages.
To Next Page
Loading...
