Song Mode and the Song Editor
Song Mode: The METRO Page
12-11
Channel
This parameter determines the MIDI channel to which the metronome program and events are
sent.
Strong Note
This parameter determines the MIDI number of the note played by the metronome for the
downbeats (the “1” of each measure).
Strong Vel
This parameter determines the velocity of the note played by the metronome for the downbeats
(the “1” of each measure).
Soft Note
This parameter determines the MIDI number of the note played by the metronome for the
upbeats (the “2,” “3,” and “4” of each measure).
Soft Vel
This parameter determines the velocity of the note played by the metronome for the upbeats
(the “2,” “3,” and “4” of each measure).
The
Rec
,
Play
, and
Stop
Soft Buttons
These soft buttons function as described in The Rec, Play, and Stop Soft Buttons on page 12-5.
The
Done
Soft Button
If no changes were made in the METRO page, pressing the Done soft button calls up the MAIN
page. If changes were made, pressing the Done soft button calls up the “Save Changes”
dialogue.
To Next Page
Loading...
