KYMCO MX’er 125 - Cable Inspection and Lubrication

3. INSPECTION/ADJUSTMENT
3
-
15
MX’er SYSTEM
Turn out: Slack is decreased.
Turn in: Slack is increased.
Tighten four bolts attaching rear axle hub to the
specification. While pushing up or down on the
chain to zero slack.
Torque: 6.0 8.0kgf-m
Tighten the adjuster.
Torque: 1.8 2.5kgf-m
CABLE INSPECTION AND
LUBRICATION
Inspect the cable sheath.
Adjuster
Adjuster
Bolts
Damaged cable sheath may cause corrosion
and interfere with the cable movement. An
unsafe condition may result so replace such
cable as soon as possible.
*