KYMCO MX’er 125 - Left Crankcase Cover; Drive Pulley

9. DRIVE AND DRIVEN PULLEYS
9
-
3
MX’er SYSTEM
LEFT CRANKCASE COVER
REMOVAL
Loosen the drive belt air tube band screw.
Remove the left crankcase cover bolts and left
crankcase cover.
Remove the gasket and dowel pins.
DRIVE PULLEY
REMOVAL
Hold the drive pulley using an universal
holder and remove the drive face nut and
starting ratchet.
Remove the drive pulley face.
Universal Holder E017
CLUTCH/DRIVEN PULLEY
Remove the drive pulley and drive belt.
Hold the clutch outer with the flywheel holder
and remove the clutch outer nut.
Remove the clutch outer.
Remove the clutch/driven pulley and drive
belt.
Universal Holder E017
Left Crankcase Cover
Air Tube Band
Bolts
Drive Pulley Face
Universal Holder
Clutch Outer
Screw
Special
Special
Nu
t
Universal Holder