Kyocera FS-3040MFP

2LW/2LX-2
1-4-3
Section Code Conditions
Jam
location
Machine 10 Paper does not arrive at the registration sensor (RS) within speci-
fied time from start of paper feed (paper feed from MP tray).
A
Paper does not arrive at the registration sensor (RS) within speci-
fied time from start of paper feed (paper feed from cassette).
B
Paper does not arrive at the registration sensor (RS) within speci-
fied time
of PF paper feed sensor turning on (paper feed from paper
feeder).
B
Paper does not arrive at the registration sensor (RS) within speci-
fied time from start of paper switchback (duplex refeeding).
G
11 Paper does not pass the registration sensor (RS) within specified
time from start of secondary paper feed.
F
12 Paper remains at the registration sensor (RS) when power is turned
on.
F
20 Paper does not arrive at the eject sensor (ES) within specified time
from start of secondary paper feed.
F
21 Paper does not pass the eject sensor (ES) within specified time
of
the registration sensor (RS) turning off.
H
22 Paper remains at the eject sensor (ES) when power is turned on. H
A1 Paper does not arrive at the duplex sensor (DUS) within specified
time from start of paper switchback.
H
A2 Paper does not pass the duplex sensor (DUS) within specified time
of the duplex sensor (DUS) turning on.
H
A3 Paper does not arrive at the duplex jam sensor (DUJS) within spec-
ified time
of the duplex sensor (DUS) turning on.
G
A4 Paper does not pass the duplex jam sensor (DUJS) within specified
time from start of secondary paper feed (duplex refeeding).
G
A5 Paper remains at the duplex sensor (DUS) or the duplex jam sensor
(DUJS) when power is turned on.
G
E0 Paper misfeed occurs due to forced stop when an error occurs dur-
ing printing.
-
F0 Paper does not arrive at the paper full sensor (PFS) within specified
time
of the eject sensor (ES) turning on.
H
F1 Paper misfeed by system error. -
F2 Paper misfeed by system error. -
*: Refer to figure 1-4-2 for paper jam location (see page 1-4-2)