2LW/2LX
1-3-45
U625 Setting the number of times of auto redialing
1. Change the setting using the cursor left/right keys or numeric keys.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U630 Setting communication control 1
Description
Makes settings for fax transmission regarding the communication.
Method
1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
Setting the communication starting speed
Sets the initial communication speed when starting transmission. When the destination unit has
V.34 capability, V.34 is selected for transmission, regardless of this setting.
1. Select the setting using the cursor up/down keys.
* : Initial setting: 14400bps/V17
2. Press the start key. The setting is set.
Item No. Description
Description Setting range Initial setting
Number of redialing 0 to 15 2 (120 V)/3 (220-240 V)
Display Description
TX SPEED Sets the communication starting speed.
RX SPEED Sets the reception speed.
TX ECHO Sets the waiting period to prevent echo problems at the
sender.
RX ECHO Sets the waiting period to prevent echo problems at the
receiver.
Display Description
14400bps/V17 V.17, 14400 bps
9600bps/V29 V.17, 9600 bps
4800bps/V27ter V.27ter, 4800 bps
2400bps/V27ter V.27ter, 2400 bps
To Next Page
Loading...
