Lanier LD235 - Search by LDAP Server

Faxing
52
2
Note
❒ If you enter a wrong destination,
press [←] or [→] and [Backspace]
or [Delete All], and then enter the
destination again.
E Confirm entered IP-Fax destination
and press [OK].
A search-in-progress message ap-
pears.
When the search is finished, a re-
sult appears.
F Select a destination.
Note
❒ If the desired destination does
not appear, use [U] or [T] to
scroll through the list.
Search by LDAP Server
A Press , the magnifier icon.
B Press [Search LDAP].
C Press [Select Server].
D Select the LDAP server to search
through.
Note
❒ LDAP servers can be programmed
under System Settings. See Net-
work Guide for the details.
❒ Make sure at least one LDAP
server is highlighted. If no LDAP
server is selected, an error mes-
sage appears after you start
searching.
E Press [OK].
F Press [Advanced Search].
RussianC4-EN_Combine-F_FM.book Page 52 Wednesday, April 27, 2005 2:01 PM