Internet Fax Functions (by Specifying an IP Address)
77
3
Internet Fax Functions (by Specifying an IP
Address)
The optional HDD and printer/scanner unit are required.
The IP-Fax function sends or receives documents between two facsimiles direct-
ly via a TCP/IP network. This function has the following advantages and is suit-
able for communication within the same LAN:
• Reducing communication costs
• Communicating between IP-Faxes at higher speed than by standard fax
IP-Fax uses SIP and H.323 as the network protocol.
Specify an IP address or host name instead of a fax number for sending. When
using a gatekeeper, specify its alias telephone number. Specify addresses of the
gatekeeper or SIP server (proxy server, register server, redirect server) as appro-
priate in IP-Fax Settings in the Facsimile Features menu. See p.150 “IP-Fax Set-
tings”, Facsimile Reference <Advanced Features> .
When using a SIP server, you can send by specifying SIP User Name.
You can also transmit to a G3 facsimile connected to the public switched tele-
phone network (PSTN) via a gateway (T.38-compliant).
To cancel IP-Fax transmission, see p.25 “Canceling a Memory Transmission”.
You can receive IP-Faxes in the same manner as standard faxes. See p.56 “Reception”.
RussianC4-EN_Combine-F_FM.book Page 77 Wednesday, April 27, 2005 2:01 PM
To Next Page
Loading...
