Lantronix SLC8 User Manual

15: Command Reference
SLC™ Console Manager User Guide 254
admin config factorydefaults
Syntax
admin config factorydefaults [savesshkeys <enable|disable>][savesslcert
<enable|disable>] [savescripts <enable|disable>] [preserveconfig <Config
Params to Preserve>]
<Config Params to Preserve>
nt - Networking ra - Remote Authentication
sv - Services dp - Device Ports
dt - Date/Time pc - PC Card
lu - Local Users ub - USB / pc - PC Card
Note: The Config Params to Preserve get contained as a comma-separated list of
current configuration parameters that are kept after the config restore or
factorydefaults.
Description
Restores the factory default settings.
admin config restore
Syntax
admin config restore <Config Name> location <local | ftp | sftp | nfs |
cifs | pccard | usb> [nfsdir <NFS Mounted Directory>] [usbport
<U1>][pccardslot <upper|lower>] [savesshkeys <enable|disable>]
[savesslcert <enable|disable>] [savescripts <enable|disable>]
[preserveconfig <Config Params to Preserve>]
<Config Params to Preserve>
nt - Networking ra - Remote Authentication
sv - Services dp - Device Ports
dt - Date/Time pc - PC Card
lu - Local Users ub - USB
Note: The Config Params to Preserve get contained as a comma-separated list of
current configuration parameters that are kept after the config restore or
factorydefaults.
Description
Restores a saved configuration to the SLC console manager.
admin config save
Syntax
admin config save <Config Name> location <local | ftp | sftp | nfs | cifs
| pccard | usb> [nfsdir <NFS Mounted Directory>] [usbport <U1>]
[pccardslot <upper|lower>] [savesshkeys <enable|disable>] [savesslcert
<enable|disable>] [savescripts <enable|disable>]

Lantronix SLC8 Specifications

General

Brand	Lantronix
Model	SLC8
Category	Server
Language	English