Lantronix SLC8 User Manual

15: Command Reference
SLC™ Console Manager User Guide 255
Description
Saves the current SLC configuration to a selected location.
admin config show
Syntax
admin config show <default|ftp|sftp|nfs|cifs|pccard|usb> [nfsdir <NFS
Mounted Dir>] [usbport <U1>][pccardslot <upper|lower>]
Description
Lists the configurations saved to a location.
admin firmware bootbank
Syntax
admin firmware bootbank <1|2>
Description
Sets the boot bank to be used at the next SLC console manager reboot. Applies to dual-boot SLC
devices only.
admin firmware copybank
Syntax
admin firmware copybank
Description
Copies the boot bank from the currently booted bank to the alternate bank (for dual-boot SLC
console managers).
admin firmware show
Syntax
admin firmware show [viewlog <enable|disable>]
Description
Lists the current firmware revision, the boot bank status (for dual-boot SLC console managers),
and optionally displays the log containing details about firmware updates.
admin firmware update
Syntax
admin firmware update <ftp | tftp | sftp | nfs | pccard |usb> file
<Firmware File> key <Checksum Key> [nfsdir <NFS Mounted
Directory>][usbport <U1>] [pccardslot <upper|lower>]
Description
Updates SLC firmware to a new revision. You should be able to access the firmware file using the
settings admin ftp show displays. The SLC console manager automatically reboots after
successful update.
The following list includes options which accept the CLEAR command:

Lantronix SLC8 Specifications

General

Brand	Lantronix
Model	SLC8
Category	Server
Language	English