The safety messages that follow have NOTICE level
hazards.
• Any part found defective or incorrect during inspection
must be replaced.
• Always tighten components to the specied torque.
Loose parts can cause damage or improper operation
• Only use replacement parts approved by LB
Performance. Other replacement parts may affect
warranty coverage.
Follow the EPA and other governmental
agency guidelines for the proper
disposal of hazardous materials such
as engine oil, diesel fuel, and engine
coolant. Consult your local authorities
or reclamation facility for guidelines.
• Dispose of hazardous materials in accordance with
all applicable laws and regulations. Never dispose of
hazardous materials by dumping them into a sewer, on
the ground, or into groundwater or waterways.
• Clean all accumulated dirt and debris on the body
and components before inspecting or performing
preventive maintenance procedures and repairs.
Operating a force feed loader with accumulated dirt
and debris will cause premature wear of components.
Accumulated dirt and debris also hinders effective
force feed loader inspection.
• Retrieve any tools or parts that may have dropped
inside of the force feed loader to avoid improper force
feed loader operation.
• If any alert indicator illuminates during operation, stop
the engine immediately. Determine the cause and
repair the problem before continuing to operate the
force feed loader.
1
3000C Force Feed Loader 1-7
To Next Page
Loading...