Decal ApplicationDecal Application
1. Be sure the installation area is clean and dry. Use
hot, soapy water to clean the surface.
2. Thoroughly dry the surface.
3. Measure and test t before removing decal paper
backing.
4. Remove the smallest split backing paper and align
decal over the specied area, carefully pressing
exposed portion into place.
5. Slowly remove remaining backing and carefully
smooth into place.
6. Small air pockets can be pierced with a pin and
smoothed using a piece of decal backing.
Safety Decals CareSafety Decals Care
• Keep safety decals and signs clean and legible at all
times.
• Replace decals and signs that are missing or become
impossible to read.
• Become familiar with the content and position of each
safety decal.
• When replacing parts that display a safety decal,
ensure that the new part is tted with the correct
decal.
• Obtain replacement safety decals or signs from your
authorized dealer.
Safety
LeeBoy 8520BCConveyor Paver1-12
To Next Page
Loading...
