152
HD4653M2
HD4653M3
HC4653/2
HC4653/3
HS4653/2
HS4653/3
Touch control
MQ00065-d-EN 05/06/2014
Selecting LED brightness (INT configurator)
Enables, upon powering the amplifier, activating the last source switched on.
Virtual configuration (MYHOME_Suite) Physical configuration
Function Parameter / setting
At rest and with the load off the LEDs are illuminated at 30%,
with the load on (only for point-to-point light controls) at
60%
0 - 10 INT = -
At rest and with the load off the LEDs are illuminated at 45%,
with the load on (only for point-to-point light controls) at
70%
0 - 10 INT = 1
At rest and with the load off the LEDs are off, with the load
on (only for point-to-point light controls) at 30%
0 - 10 INT = OFF
NOTE:
There could be a difference in brightness and colour from one device to another (even in
the same production batch) due to the construction technology.
To Next Page
Loading...
