LEGRAND 3440 - Page 310

301
5739 18 (White)
5739 19 (Magnesium)
067456
3550
TiThermo software
TiThermo is the tool used for creating or changing, through a simple and logic graphic
interface, the conguration to be sent to the temperature control system central unit,
dening and customising the parameters of the temperature control system and the proles
of the various operating programs.
Thanks to a dedicated function, the software may also be used to update the central unit
rmware.
The software can be used to:
- customize the zones
- manage the actuators, selecting the type of function to be assigned (heating, cooling,
heating+cooling, no function) and the type of load for the selected function (ON/OFF,
Open/ Close, Fan-Coil, Gateway)
- manage the circulation pumps, selecting the type of function to be assigned (heating,
cooling, heating+cooling, no function) and the tripping delays
- customise the conguration parameters and the operating programs of the central unit
(e.g. weekly programs, holiday programs)
- create up to 16 scenarios for each operating mode of the system (Heating and Cooling).
In each scenario also set dierent temperatures for each area
- export and/or import proles and collections (as XML les).
NOTE: for more information on the operation of the application see the manual supplied
with the products.
The central unit is connected to the PC using cable item 335919 or with item 3559
or 049234 (see gure). This accessory is not included with the central unit, and must
therefore be purchased separately.
TiThermo screenshots
99-zone central unit
MQ00187-c-EN 29/04/2014