Group 8 Trouble shooting Page 127
Release 3.00 Leibinger-Jet 2 se
Phasing error! The charging electrode could be
dirty. If necessary please clean.
Check charging electrode and clean.
Display message:„phasing-error, please check charge electrode for dirt
accumulation. Clean, if necessary“
Risk of crushing/piercing!
During the closing movement of the print head your fingers could
get caught between deflector unit or nozzle plate and gutter or
during the opening movement between housing and gutter. Only
carry out cleaning and service work with the machine placed idle.
Remove mains plug!
High voltage current too high. Please check
the deflector plates for dirt or dampness.
Check deflector plates.
Display message:„hv-current to high check deflection plate for dirt or
humidity“
Description of the malfunction Trouble shooting activity
Dangerous material in the machine!
Read the safety leaflets and the regulations on personal safety
equipment!
Risk of injury!
Spraying of ink into the eyes can cause blindness. Prior to the
opening of the device eye protection must be put on!
Risk of injury!
Upon contact the contents causes skin irritation. Protective
equipment is necessary!
It is imperative that the instructions on the subject of handling inks and
solvents (thinners) in the groups Safety instructions and Accident
prevention are observed!
Ink will soon be empty! Please refill.
Refill ink.
Display message:„Ink tank is low level please refill ink“
Solvent will soon be empty! Please refill. Refill solvent.
Display message:„Solvent tank is low level please refill solvent“
To Next Page
Loading...
