Group 9 Equipping/maintenance Page 145
Release 3.00 Leibinger-Jet 2 se
9.4.1.2 Cleaning the deflector unit and gutter
Dangerous electrical voltage!
Contact causes serious damage through an electric shock!
Disconnect the device from the mains supply prior to opening.
Remove mains plug!
Risk of fire!
Combustible gases and liquids cause serious burns. Sources of
ignition must be kept away from the print head!
Risk of injury!
Ink escapes from the head aperture. Spraying of ink into the eyes
can cause blindness. Eye protection is necessary!
Risk of injury!
Upon contact the contents causes skin irritation. Protective
equipment is necessary!
Figure 110
1 – Charging
electrode
2 – Deflector
plate
3 – Gutter
Deflector unit
Clean gutter (3) carefully with solvent! The deflector unit consists of a charging electrode
(1) and a deflector plate (2). To clean the deflector plate the gutter must first of all be
closed in order to prevent damage to the nozzle seal. Only close head with clean
gutter!
Risk of crushing/piercing!
During the closing movement of the print head your fingers could
get caught between deflector unit or nozzle plate and gutter or
during the opening movement between housing and gutter. Keep
your hands outside of the danger area!
1
2
3
To Next Page
Loading...
