Group 10 Replacement parts Page 154
Release 3.00 Leibinger-Jet 2 se
10.3 Replacement parts print head SK2
Deflection plate complete 54-000 059 SE
Shaft for deflection unit 54-000 108 SB
Outer cover, complete with magnet 54-000 955 SA
Compression spring for tensioning bolt 54-000 190 KA
Nozzle complete, 50 µm 54-000 209 SD
Nozzle complete, 60 µm 54-001 158 SB
Nozzle complete, 70 µm 54-000 815 SD
Automatic nozzle seal cpl. with motor and control shaft 54-000 297 SB
Screw-in cover for head filter 54-000 017 TB
Filter insert for head filter 54-000 016 TA
Mounting plate for O-ring for nozzle plate 54-000 206 TG
Toggle lever for swivel plate 54-000 622 SA
Head electronic board, complete 54-000 311 SC
Charging electrode complete 54-000 140 SC
LED complete with connector 54-000 394 SA
O-ring for nozzle 54-000 771 KA
O-ring for head filter 54-000 019 KA
O-ring for oscillator 54-000 161 KA
Leg spring for swivel plate 54-000 547 TA
Screw for nozzle plate M1.6x2.5 (flathead) 40025-00009
Swivel plate deflector unit 52-000 100 TE
Oscillator 64 kHz with bush 54-000 702 SB
Oscillator 96 kHz with bush 54-000 612 SB
Swivel screw for O-ring nozzle plate 54-000 295 SA
Drop production unit, complete 64 kHz, with oscillator 54-000 707 SA
Drop production unit, complete 96 kHz, with oscillator 54-000 300 SB
Drop production unit housing, complete 64 kHz 54-000 708 SA
Drop production unit housing complete 96 kHz 54-000 198 SA
Assorted fastener kit print head SK2 54-002 798 SA
10.4 Special tools
Wrench set, consisting of:
8 / 13 / 4.5 / 5.5 / 6 / 7 54-002 331 SA
Angled screwdriver for TORX screws 54-002 333 KA
Set of hexagon socket screw keys, 4mm and 5 mm 54-002 360 SA
Set of Screwdrivers, solvent resistant
54-002 361 SA
consisting of:
PH 1 x 60 cross, PH 00 x 40 cross, PH 3.0 x 50 blade
To Next Page
Loading...
