Leibinger Jet 2 - Logoff as Supervisor or Advanced Operator

Group 7 Data Entry Page 95
Release 3.00 Leibinger-Jet 2 se
7.4.4.3 Logoff as supervisor or advanced operator
To log off as supervisor or advanced operator either to reset the LEIBINGER-JET 2
to the operator-mode you have to proceed as following:
! Press the touch field <password management> (90) in the menu level <E2>.
! The surface of the password administration <E7> will be called up.
! Press the touch field <enter password> (91).
! The keyboard field <E50> opens to enter the password.
! Enter the password of the active user again and confirm it with the touch field <RET>
(92).
! The LEIBINGER-JET 2 changes back to the password administration menu <E7>
and the password level 3 (operator-mode) will be activated.
Figure 69
[E7]
92
91
[E50]
Enter password again
[E7]
[E2]
90