Safety Instructions
10
Tyres
• When working on the tyres make sure that the implement has been placed on
the ground safely and that it is secured by chocks against unintentional rolling!
• Fitting tyres requires knowledge and special tools!
• Repair work on tyres may only be conducted by trained staff and with suitable
tools!
• Check air pressure regularly and adhere to the advised air pressure!
Maintenance
• Repair-, maintenance- and cleaning operations as well as adjustments and
remedy of function faults should principally be conducted with engine stopped
and brakes applied. Remove ignition key!
• Check and tighten nuts and bolts regularly!
• When conducting maintenance work on a lifted implement always place suit-
able supports underneath!
• For replacing any tools with cutting edges always use suitable tools and gloves!
• Dispose of old oils, grease and filters as prescribed by law.
• Before working on the electric gear disconnect battery cables!
• When conducting electrical welding operations on the tractor or on the mounted
implement remove cable from the generator and the battery!
• Any spare parts fitted must meet with the implement manufacturer's fixed tech-
nical standards! This is for example ensured by using genuine spare parts!
• To avoid danger of explosion only use nitrogen for filling up gas tanks!
To Next Page
Loading...
