Step4.Rotatethehot-swaprearharddiskdriveup(see“Rotatingthehot-swaprearharddiskdrive
cageup”onpage155
).
Step5.Disconnectanycablesfromtheadapter(makenoteofthecablerouting,incaseyoureinstall
theadapterlater).
Step6.RemovethePCIriser-cardassembly1or2(see“RemovingaPCIriser-cardassembly”onpage
197).
Step7.ThefollowingillustratesthestepsforremovinganadapterfromthePCIriser-cardassemblies:
•ForPCIriser-cardassembly1:
1.Rotatetheretentionlatchtotheopenposition.
2.Carefullygrasptheadapterbyitstopedgeoruppercorners,andpulltheadapterfromthe
PCIriser-cardassembly.
Figure96.Adapterremoval
Step8.Placetheadapteronaflat,static-protectivesurface.
Step9.Ifyouareinstructedtoreturntheadapter,followallpackaginginstructions,anduseanypackaging
materialsforshippingthataresuppliedtoyou.
Replacingtheinsulatorsheetforthepowercable
Usethisinformationtoreplacetheinsulatorsheetforthepowercable
Toreplacetheinsulatorsheetforthepowercable,completethefollowingsteps.
Step1.Readthesafetyinformationthatbeginsonpage“Safety”onpagevand“Installationguidelines”
onpage30.
Chapter6.Removingandreplacingcomponents169
To Next Page
Loading...
