Lenze i700

Lenze · i700 servo inverter · reference manual · DMS 3.0 EN · 06/2016 · TD06 5
Contents
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.11.6 Setting the field weakening controller (ASM) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 129
0x29E0 | 0x31E0 - Field weakening controller: Parameter
0x29E1 | 0x31E1 - field: Field set value limitation
0x29E2 | 0x31E2 - DC link circuit voltage: Filter time
0x29E3 | 0x31E3 - motor: Actual voltage - filter time
0x29E4 | 0x31E4 - Voltage reserve range
5.11.7 Field weakening operation - synchronous motor (SM) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 131
5.12 Fine adjustment des motor model _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 132
5.12.1 Correction of the stator leakage inductance (Lss)... _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 132
0x2C04 | 0x3404 - Motor: Lss saturation characteristic - inductance grid points (y)
0x2C05 | 0x3405 - Motor: Lss saturation charcteristic - reference for current grid points (x)
5.12.1.1 Example for determining the saturation characteristic _ _ _ _ _ _ _ _ _ _ _ 135
5.12.2 Synchronous motor (SM): Compensating for temperature and current influences _ _ _ 138
0x2C06 | 0x3406 - Motor (SM): Magnet characteristic (current) - grid points
5.12.3 Asynchronous motor (ASM): Identifying the Lh saturation characteristic _ _ _ _ _ _ _ _ _ 139
0x2C07 | 0x3407 - Motor (ASM): Lh saturation characteristic - inductance grid points (y)
5.12.4 Estimating the optimal magnetising current _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 141
5.13 Parameterising filter elements in the setpoint path _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 142
5.13.1 Jerk limitation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 142
0x2945 | 0x3145 - Torque: Setpoint jerk limitation
5.13.2 Notch filters (band-stop filters) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 142
0x2944 | 0x3144 - Torque: Notch filter setpoint torque
5.14 Parameterising the V/f characteristic control _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 146
5.14.1 Defining the V/f characteristic shape _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 147
0x2B00 | 0x3300 - VFC: V/f characteristic - shape
0x2B01 | 0x3301 - VFC: V/f characteristic - define reference point
0x2B02 | 0x3302 - VFC: User-definable V/f characteristic - frequency grid points (x)
0x2B03 | 0x3303 - VFC: User-definable V/f characteristic - voltage grid points (y)
5.14.2 Torque increase in the lower speed range ("Boost" function) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 150
0x2B04 | 0x3304 - VFC: Voltage vector control - setpoint current
0x2B05 | 0x3305 - VFC: Voltage vector control parameter
5.14.3 Setting the voltage boost _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 151
0x2B06 | 0x3306 - VFC: Voltage boost
5.14.4 Setting the load adjustment _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 152
0x2B07 | 0x3307 - VFC: Load adjustment parameter
5.14.5 Defining the behaviour at the current limit (Imax controller) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 153
0x2B08 | 0x3308 - VFC: Imax controller - Parameter
5.14.6 Setting the slip compensation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 155
0x2B09 | 0x3309 - VFC: Slip compensation - Parameter
5.14.7 Setting the oscillation damping _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 156
0x2B0A | 0x330A - VFC: Oscillation damping - Parameter
5.14.8 Optimising pull-out slip limitation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 158
0x2B0C | 0x330C - VFC: Override point of field weakening
5.14.9 Display parameter _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 158
0x2B0B | 0x330B - VFC: Setpoint frequency
5.14.10 "Flying restart" function _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 159
0x2BA0 | 0x33A0 - Flying restart: Activate
0x2BA1 | 0x33A1 - Flying restart: Current
0x2BA2 | 0x33A2 - Flying restart: Start frequency
0x2BA3 | 0x33A3 - Flying restart: Integration time
0x2BA4 | 0x33A4 - Flying restart: Min. deviation
0x2BA5 | 0x33A5 - Flying restart: Delay time
0x2BA6 | 0x33A6 - Flying restart: Result
5.15 "DC-injection braking" function _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 163
0x2B80 | 0x3380 - DC-injection braking: Current