What to do if my Lexmark Printer says '[Color] cartridge very low, [x] estimated pages remain'?
If your Lexmark printer displays a message indicating a '[Color] cartridge very low', you may need to replace the toner cartridge very soon. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.
How to fix 'Incorrect paper size' error on Lexmark Printer?
To address the 'Incorrect paper size' error on your Lexmark printer, load the correct size of paper in the paper source. Alternatively, from the printer control panel, select Continue to clear the message and print using a different paper source. For non-touch-screen printer models, press to confirm. Also, check the length and width guides of the paper source to ensure the paper is loaded properly. Finally, make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog, as well as in the Paper menu on the printer control panel.
What to do if my Lexmark Printer says 'Remove paper from standard output bin'?
If your Lexmark printer displays the message 'Remove paper from standard output bin', remove the paper stack from the standard bin.
How to resolve 'Insufficient memory to collate job' on Lexmark Printer?
If your Lexmark printer displays 'Insufficient memory to collate job', from the printer control panel, select Continue to print the part of the job already stored and begin collating the rest of the print job. For non-touch-screen printer models, press to confirm. You can also cancel the current print job.
What to do if my Lexmark Printer says 'Standard USB port disabled'?
If your Lexmark printer displays 'Standard USB port disabled', from the printer control panel, select Continue to clear the message. For non-touch-screen printer models.
What to do if my Lexmark Printer says 'Supply needed to complete job'?
If your Lexmark printer displays 'Supply needed to complete job', from the printer control panel, touch Prompt for supplies to view all error messages that indicate what supplies are needed to continue processing the current job. For non-touch-screen printer models, press to clear the message and continue printing. You can also order the missing supply immediately, install the supply, or cancel the print job, then install the missing supply, and then resend the print job.
What to do if my Lexmark Printer says 'SMTP server not set up. Contact system administrator.'?
From the printer control panel, press to clear the message.
How to fix 'Scanner automatic feeder cover open' error on Lexmark Printer?
To resolve the 'Scanner automatic feeder cover open' message on your Lexmark printer, close the ADF cover.
How to fix 'Close door' error on Lexmark Printer?
To resolve the 'Close door' message on your Lexmark printer, ensure that the right side cover is installed, and then close the front and top doors.
What to do if my Lexmark Printer says '[Type] imaging kit low'?
If your Lexmark printer displays a message indicating that the '[Type] imaging kit low', you may need to order an imaging kit. If necessary, select Continue on the printer control panel to clear the message and continue printing.
General| Print Technology | Color Laser |
|---|---|
| Scan Technology | CIS |
| ADF Capacity | 50 sheets |
| Duplex Printing | Yes |
| Standard Connectivity | USB 2.0, Ethernet |
| Memory | 512 MB |
| Display | 2.4-inch color LCD |
| Maximum Paper Size | 8.5 x 14 inches |
| Scanner Type | Flatbed, ADF |
| Processor Speed | 800 MHz |
| Functions | Print, Copy, Scan |
| Copy Resolution | 600 x 600 dpi |
| Network Connectivity | Ethernet |
| Operating Systems Supported | Windows, Mac OS, Linux |
| Standard Paper Input | 250 sheets |
| Paper Capacity | 250 sheets |
| Fax | No |
Identifies notes, warnings, and cautions used in the manual.
How to configure paper settings for trays and feeders.
Instructions for printing documents from a computer or mobile device.
Basic steps for making copies using the ADF or scanner glass.
Tips to reduce paper and toner consumption for cost and environmental benefits.
Information on how to order genuine Lexmark toner cartridges and imaging kits.
Instructions for removing and installing toner cartridges.
Procedures for replacing the developer unit to resolve print quality defects.
Tips and best practices for preventing paper jams.
Specific steps to clear paper jams from the standard paper bin.
Explains common error and status messages displayed by the printer.
Troubleshooting why confidential, verify, reserve, or repeat print jobs are not printing.
Steps to diagnose why print jobs are not being sent to the printer.
Troubleshooting jagged or uneven character edges in print output.
Resolving issues where print output is cut off or clipped on the edges.
Adjusting settings to correct print output that is too dark.
Troubleshooting steps when the copier function is unresponsive.
Diagnosing and fixing issues related to poor quality copies.
Troubleshooting steps when the scanner function is unresponsive.
Essential information to prepare before contacting Lexmark support for assistance.
Outlines the terms and conditions of the product's limited warranty.
To Next Page
