Lexmark M3150

Insucient memory service check
Action Yes No
Step 1
Disable the Resource save feature:
Settings > Print Settings > Setup Menu > Resource Save > O
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
Check the memory card for proper installation.
Is it properly installed?
Go to step 3. Reseat the memory
card.
Step 3
a Print the Menu settings page:
Settings > Reports > Menu Settings Page
b POR into the Configuration menu and reset the printer’s
settings to factory default:
Configuration Menu > Factory Defaults > Restore Base
c Remove the memory card.
d Restart the printer.
Does the error remain?
Replace the
controller board. See
“Controller board
removals” on
page 247.
Replace the memory
card.
Flash full service check
Action Yes No
Step 1
Format the flash memory. Navigate to Settings > Print Settings >
Utilities, then select Format Flash.
Does the error remain?
Go to step 2. The problem is
solved.
Step 2
Remove the installed memory, and then POR the machine.
Does the error remain?
Go to step 3. Replace the memory
card.
Step 3
Replace the controller board. See
“Controller board removals” on
page 247.
Does the error remain?
Contact the next
level of support.
The problem is
solved.
4514-6xx
Diagnostics and troubleshooting
131