Hardware Tests
If the hardware test fails, replace the failing part.
Panel Test
This test
verifies
the function of the control panel display.
1 Enter the Diagnostics menu, and then navigate to:
Hardware Tests > Panel Test
2 Exit the test.
Button Test
This test
verifies
the control panel button function except for the Sleep button.
To run the test for the MS510dn or MS610dn:
1 From the Diagnostics menu, navigate to:
Hardware Tests > Button Test
2 The panel displays Press and an icon matching one of the control panel buttons. Press the physical button
that is represented by the icon, and the printer tests the function of that button.
If the test is successful, then the panel displays another icon to test.
If a button fails the test, or if a dierent button is pressed, then the panel displays Test Failed and returns
to the main section of the Hardware tests menu. After three seconds of inactivity, the panel automatically
returns to the main section of the Hardware tests menu.
If all buttons pass the test, then the panel displays PASSED and returns to the main section of the Hardware
tests menu.
3 Press X or Back to exit the test.
To run the test for the MS610de:
1 From the Diagnostics menu, navigate to:
Hardware Tests > Button Test
2 With no buttons pressed, a pattern matching the control panel buttons is displayed. Press each control panel
button one at a time, and the panel highlights the represented button in the matching pattern.
3 Release the button, and the highlight disappears.
4 Press X or Back to exit the test.
4514-6xx
Service menus
178
To Next Page
Loading...
