900 errors
900 error messages
Error code Description Action
900.xx RIP firmware errors Go to
“900 error service check” on page 149.
900 error service check
Action Yes No
Step 1
a Perform a POR.
b Check if a 900.xx error code appears on the display.
Does a 900.xx error code appear?
Go to step 4. Go to step 2.
Step 2
Check if another type of error code appears instead of the 900.xx
error code.
Does a
dierent
error code appear?
Go to step 3. Go to step 4.
Step 3
See the error code and its service instructions in the printer Service
Manual.
Does the problem remain?
Go to step 4. The problem is
solved.
Step 4
a Turn o the printer.
b At the rear of the printer, disconnect the network cable, USB
cable, and fax line.
c Turn on the printer.
Does the problem remain?
Go to step 12. Go to step 5.
Step 5
a From the control panel, navigate to the Reports menu.
b Select Device Statistics and Device Settings.
Does the problem remain?
Go to step 12. Go to step 6.
Step 6
Check if the printer has a scanner.
Does the printer have a scanner?
Go to step 7. Go to step 8.
4514-6xx
Diagnostics and troubleshooting
149
To Next Page
Loading...
