5 Extract the contents of the zip file, open the Readme file, and then follow the instructions in the file.
Notes:
• Perform the install instructions on the Readme file in the exact order shown. Restart the printer only if
the file says so.
• For more information on how to flash the downloaded files, see “Updating the printer firmware ” on
page 209.
• To load the zip files that are extracted from the Service Restore Tool, see “Restoring solutions,
licenses, and configuration settings” on page 208.
6 After performing the installation instructions in the Readme file, confirm from the customer if all the eSF
apps have been installed.
Notes:
• If you are unable to access the administrative menus to verify that the printer is restored, then ask the
customer for access rights.
• If a 10.00 error appears after you restart the printer, then contact the next level of support.
4514-6xx
Parts removal
207
To Next Page
Loading...
