Lexmark MS823 - Page 205

Error
code
Description Action
417.11 Paper remains detected at the bin 1
sensor (mailbox pass‑through 1) after the
printer is turned on.
See
“Sensor (mailbox pass‑through 1) static jam service
check” on page 209.
417.13 Paper did not reach the bin 1 sensor
(mailbox pass‑through 1) on time.
See
“Sensor (mailbox pass‑through 1) late‑arriving or
late‑leaving jam service check” on page 211.
417.15 Paper did not clear the bin 1 sensor
(mailbox pass‑through 1) on time.
417.21 Paper remains detected at the bin 2
sensor (mailbox pass‑through 1) after the
printer is turned on.
See
“Sensor (mailbox pass‑through 1) static jam service
check” on page 209.
417.23 Paper did not reach the bin 2 sensor
(mailbox pass‑through 1) on time.
See
“Sensor (mailbox pass‑through 1) late‑arriving or
late‑leaving jam service check” on page 211.
417.25 Paper did not clear the bin 2 sensor
(mailbox pass‑through 1) on time.
417.31 Paper remains detected at the bin 3
sensor (mailbox pass‑through 1) after the
printer is turned on.
See
“Sensor (mailbox pass‑through 1) static jam service
check” on page 209.
417.33 Paper did not reach the bin 3 sensor
(mailbox pass‑through 1) on time.
See
“Sensor (mailbox pass‑through 1) late‑arriving or
late‑leaving jam service check” on page 211.
417.35 Paper did not clear the bin 3 sensor
(mailbox pass‑through 1) on time.
418.11 Paper remains detected at the bin 1
sensor (mailbox pass‑through 2) after the
printer is turned on.
See
“Sensor (mailbox pass‑through 2) static jam service
check” on page 214.
418.13 Paper did not reach the bin 1 sensor
(mailbox pass‑through 2) on time.
See
“Sensor (mailbox pass‑through 2) late‑arriving or
late‑leaving jam service check” on page 215.
418.15 Paper did not clear the bin 1 sensor
(mailbox pass‑through 2) on time.
418.21 Paper remains detected at the bin 2
sensor (mailbox pass‑through 2) after the
printer is turned on.
See
“Sensor (mailbox pass‑through 2) static jam service
check” on page 214.
418.23 Paper did not reach the bin 2 sensor
(mailbox pass‑through 2) on time.
See
“Sensor (mailbox pass‑through 2) late‑arriving or
late‑leaving jam service check” on page 215.
418.25 Paper did not clear the bin 2 sensor
(mailbox pass‑through 2) on time.
418.31 Paper remains detected at the bin 3
sensor (mailbox pass‑through 2) after the
printer is turned on.
See
“Sensor (mailbox pass‑through 2) static jam service
check” on page 214.
418.33 Paper did not reach the bin 3 sensor
(mailbox pass‑through 2) on time.
See
“Sensor (mailbox pass‑through 2) late‑arriving or
late‑leaving jam service check” on page 215.
418.35 Paper did not clear the bin 3 sensor
(mailbox pass‑through 2) on time.
4064
Diagnostics and troubleshooting
205