Lexmark MS823 Service Manual

Fuser removal
1 For models using a hot roll type of fuser, remove the printhead access cover. See “Printhead removal” on
page 455.
2 Open the rear door.
3 Rotate the latches to release, and then remove the fuser.
Sensor (rear door interlock) removal
1 Remove the rear door. See “Rear door removal” on page 449.
2 Remove the rear cover. See “Rear cover removal” on page 450.
3 Remove the screw, and then disconnect the sensor cable (B).
4 Remove the sensor.
4064
Parts removal
452

Lexmark MS823 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 65 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Recommended Monthly Page Volume	5, 000 - 75, 000 pages
Processor Speed	1 GHz
Standard Memory	512 MB
Connectivity	USB, Ethernet
Standard Input Capacity	650 pages
Maximum Paper Input	4, 400 sheets
Media Types Supported	Plain paper, Card stock, Envelopes, Labels, Transparencies
Operating System Compatibility	Windows, Linux
Duplex Printing	Automatic