Lexmark MS823 Service Manual

Action Yes No
Step 2
Reseat or replace the cables.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
Restart the printer.
Does the problem remain?
Go to step 4. The problem is
solved.
Step 4
Replace the tray 1 paper feeder. See
“Paper feeder removal” on
page 417.
Does the problem remain?
Go to step 5. The problem is
solved.
Step 5
Restart the printer.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
162–169 errors
162 error messages
Error code Description Action
162.80 Motor (tray 2 pick/lift) does not turn on. See
“Optional tray pick drive failure service
check” on page 324.
162.81 Motor (tray 2 pick/lift) does not turn o.
162.82 Motor (tray 2 pick/lift) speed did not ramp up to the
required level.
162.83 Motor (tray 2 pick/lift) stalled.
162.84 Motor (tray 2 pick/lift) ran too slow.
162.85 Motor (tray 2 pick/lift) ran too fast.
162.86 Motor (tray 2 pick/lift) moved too long.
4064
Diagnostics and troubleshooting
319

Lexmark MS823 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 65 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Recommended Monthly Page Volume	5, 000 - 75, 000 pages
Processor Speed	1 GHz
Standard Memory	512 MB
Connectivity	USB, Ethernet
Standard Input Capacity	650 pages
Maximum Paper Input	4, 400 sheets
Media Types Supported	Plain paper, Card stock, Envelopes, Labels, Transparencies
Operating System Compatibility	Windows, Linux
Duplex Printing	Automatic