Lexmark MS823 Service Manual

4 Carefully twist until the left end is also released.
1 2 3
5 Remove the diverter.
Installation note: Use a flat-head screwdriver to push the left and right ends of the diverter in place.
Mailbox top diverter spring removal
1 Remove the mailbox left cover. See “Mailbox left cover removal” on page 654.
2 Remove the mailbox rear door. See “Mailbox rear door removal” on page 649.
3 Remove the mailbox controller board. See “Mailbox controller board removal” on page 667.
4064
Parts removal
689

Lexmark MS823 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 65 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Recommended Monthly Page Volume	5, 000 - 75, 000 pages
Processor Speed	1 GHz
Standard Memory	512 MB
Connectivity	USB, Ethernet
Standard Input Capacity	650 pages
Maximum Paper Input	4, 400 sheets
Media Types Supported	Plain paper, Card stock, Envelopes, Labels, Transparencies
Operating System Compatibility	Windows, Linux
Duplex Printing	Automatic