Lexmark MS823 Service Manual

By default, diverters 1 to 3 are positioned so that the paper goes straight up. Depending on the destination bin,
diverters along the paper path may redirect the paper to the assigned bin. Solenoids control diverters 1 to 3.
On the other hand, the mailbox top diverter is positioned so that the paper exits by default to bin 4. Paper will
only go straight up if an optional bin on top of the mailbox is the destination bin of the print job.
Mailbox transport and exit drive
1 Transport rollers
2 Exit rollers
3 Motor (transport)
Transport rollers and exit rollers along the paper path move the paper to the destination bin assigned for the
print job.
The motor (transport) drives both the transport and exit rollers.
4064
Theory of operation
899

Lexmark MS823 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 65 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Recommended Monthly Page Volume	5, 000 - 75, 000 pages
Processor Speed	1 GHz
Standard Memory	512 MB
Connectivity	USB, Ethernet
Standard Input Capacity	650 pages
Maximum Paper Input	4, 400 sheets
Media Types Supported	Plain paper, Card stock, Envelopes, Labels, Transparencies
Operating System Compatibility	Windows, Linux
Duplex Printing	Automatic