Sensor (input) early‑leaving jam service check
Action Yes No
Step 1
Check the paper path for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
Go to step 3. Go to step 2.
Step 2
Remove the paper fragments and partially fed paper.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
Check if paper is properly loaded in each tray.
Is paper properly loaded in each tray?
Go to step 5. Go to step 4.
Step 4
Remove the paper, and then properly load it to the tray.
Does the problem remain?
Go to step 5. The problem is
solved.
Step 5
Perform a print test.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
202 paper jams
202 paper jam messages
Error code Description Action
202.02 Paper fed from the MPF was detected earlier than
expected at the sensor (fuser exit).
See
“Sensor (fuser exit) early-arriving jam
service check” on page 93.
202.03 Paper fed from the MPF never reached the sensor
(fuser exit).
See
“Sensor (fuser exit) late-arriving jam service
check” on page 94.
202.04 Paper fed from the MPF cleared the sensor (fuser
exit) earlier than expected.
See
“Sensor (fuser exit) early-leaving jam
service check” on page 98.
202.05 Paper fed from the MPF never cleared the sensor
(fuser exit).
See
“Sensor (fuser exit) late-leaving jam service
check” on page 99.
202.12 Paper fed from tray 1 was detected earlier than
expected at the sensor (fuser exit).
See
“Sensor (fuser exit) early-arriving jam
service check” on page 93.
202.13 Paper fed from tray 1 never reached the sensor
(fuser exit).
See
“Sensor (fuser exit) late-arriving jam service
check” on page 94.
202.14 Paper fed from tray 1 cleared the sensor (fuser exit)
earlier than expected.
See
“Sensor (fuser exit) early-leaving jam
service check” on page 98.
4064
Diagnostics and troubleshooting
91
To Next Page
Loading...
Need help?
General
