Lexmark MS823 Service Manual

Assembly 31: Staple finisher 3
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8745 1 1 Sensor (staple throat
paper present)
“Sensor (staple throat paper present)
removal” on page 644
2 40X8742 2 1 Staple finisher bin
spring
“Staple finisher bin spring removal” on
page 613
3 40X8744 2 1 Staple finisher bin link
assembly
“Staple finisher bin link assembly
removal” on page 614
4 40X8721 2 1 Staple finisher latch
“Staple finisher latch removal” on
page 616
5 41X0802 1 1 Sensor (staple finisher
bin full send)
“Sensor (staple finisher bin full send)
removal” on page 608
6 40X8226 1 1 Staple finisher spring
with string
“Staple finisher spring with string
removal” on page 617
7 41X0654 1 1 Staple unit
“Staple unit removal” on page 592
8 41X2198 1 1 Staple cartridge door
close limit switch
“Staple cartridge door close limit
switch removal” on page 647
4064
Parts catalog
834

Lexmark MS823 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 65 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Recommended Monthly Page Volume	5, 000 - 75, 000 pages
Processor Speed	1 GHz
Standard Memory	512 MB
Connectivity	USB, Ethernet
Standard Input Capacity	650 pages
Maximum Paper Input	4, 400 sheets
Media Types Supported	Plain paper, Card stock, Envelopes, Labels, Transparencies
Operating System Compatibility	Windows, Linux
Duplex Printing	Automatic