Lexmark MS823 Service Manual

Assembly 32: Staple finisher 4
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8212 2 1 Tamper drive belt
“Tamper drive belt removal” on
page 620
2 41X1705 2 1 Tamper spring
“Tamper drive belt removal” on
page 620
3 40X8211 1 1 Motor (staple finisher
right tamper)
“Motor (staple finisher right tamper)
removal” on page 619
4 40X8211 1 1 Motor (staple finisher
left tamper)
“Motor (staple finisher left tamper)
removal” on page 619
5 41X1704 1 1 Staple finisher bin LED
“Staple finisher bin LED removal” on
page 625
6 41X0664 2 1 Tamper gear
“Tamper drive belt removal” on
page 620
741X2196 2 1Tamper bracket ‑‑
8 41X1238 1 1 Sensor (staple finisher
left tamper)
“Sensor (staple finisher left tamper)
removal” on page 623
9 41X2160 1 1 Tamper aligner
“Tamper aligner removal” on page
627
10 41X1238 1 1 Sensor (staple finisher
right tamper)
“Sensor (staple finisher right tamper)
removal” on page 621
4064
Parts catalog
836

Lexmark MS823 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 65 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Recommended Monthly Page Volume	5, 000 - 75, 000 pages
Processor Speed	1 GHz
Standard Memory	512 MB
Connectivity	USB, Ethernet
Standard Input Capacity	650 pages
Maximum Paper Input	4, 400 sheets
Media Types Supported	Plain paper, Card stock, Envelopes, Labels, Transparencies
Operating System Compatibility	Windows, Linux
Duplex Printing	Automatic