Lightware MX8x8HDMI-PRO - View Installed Controllers Firmware; View Current Control Protocol; Set Current Control Protocol

Page 48 / 109
Legend (MX32x32 Frame): The router has 4 input and 4 output cards (32x32)
installed. All cards are DVI-HDCP.
Legend (MX16x16 Frame): The router has 2 input and 2 output cards (16x16)
installed.
Legend (MX8x8 Frame): The router has 1 input and 1 output cards (8x8)
installed.
4.2.6. View installed controllers’ firmware
Description: Shows the firmware revisions
of the installed programmed controllers
Example:
MX32x32
→ {FC}
←
←
←
(CF MX-CP FW:1.0.2 @ 0X10)CrLf
(CF MX-CP FW:1.0.2 @ 0X12)CrLf
(CF MX-DVI-EDID FW:1.1.0 @ 0X20)CrLf
MX16x
16
→ {FC}
←
←
(CF MX-CP FW:1.0.2 @ 0X10)CrLf
(CF MX-DVI-EDID FW:1.1.0 @ 0X20)CrLf
MX8x8
→ {FC}
←
←
(CF MX-CP FW:1.0.2 @ 0X10)CrLf
(CF MX-DVI-EDID FW:1.1.0 @ 0X20)CrLf
4.2.7. View current control protocol
Description: Shows the RS-232, TCP/IP
control protocol.
4.2.8. Set current control protocol
Description: Sets the current RS-232,
TCP/IP control protocol (Default is ’1’)
→ {FC}
← (CF CARD_FIRMWARE)CrLf
→ {P_?}
← (CURRENT PROTOCOL = #1)CrLf
→ {P_x}
← (PROTOCOL #<x> SELECTED!)CrLf