Lloyd LS1 - YLC Loadcell Threads; Grip through Pin

LS SERIES SERVICE MANUAL
ISSUE 4.0 MECHANICAL ASSEMBLIES 14
8.16 YLC Loadcell Threads
YLC LOADCELL FEMALE THREAD SIZE
5N - 500N Loadcell Thread M6 – 1p
1kN - 5kN Loadcell Thread M12 - 1.75p
Note that some food grips are supplied with a 6mm threaded rod to screw into the bottom of the
YLC loadcell. When using these grips, remove the eye end assembly from the bottom of the
loadcell then screw the rod directly into the loadcell.
8.17 YLC Loadcell Mounting Bolts
YLC LOADCELL MOUNTING BOLT
5N - 10kN
M12 – 1.75p
Button Head Screw
70108412025
8.18 Grip Through Pin
EYE END
DIAMETER
THROUGH PIN
DIAMETER
THROUGH PIN
LENGTH
PART NUMBER
5/8 Inch
15.875 mm
5/16 Inch
7.75 mm
39 mm PIT/0169/00