Joint Robot Manipulator - Software Operation Manual
Advantech LNC Technology Co., Ltd.
15
to reverse back according to the path
that has traveled. In the automatic
mode, it moves when this button is
pressed and stops when released.
Reset：equivalent to the reset function on
the title bar
Close：Close window of coordinate page
3.3.3. Operation for motions
Coordinate selection:
You can select the coordinates of "World", "Work" and "Joint".
Coordinate input:
You can click the coordinate value field to input the value directly,
or press “Select Current” to bring the current coordinate value first,
and then modify it for specific items.
Move to coordinates:
Press "To" to move to the target coordinate value, and stop when it
is released.
3.4. IO
To Next Page
Loading...
Need help?
General
