Joint Robot Manipulator - Software Operation Manual
Advantech LNC Technology Co., Ltd.
51
Used to dynamically switch the preset range of
points in the limit page to avoid operation or
programming errors and exceed the allowed
active space.
It is used to dynamically switch the coordinate
system record set in the coordinate system
page. The use can easily see the current
coordinate system in the program list.
It is used in applications where the robot
clamps the workpiece for path editing, such as
polishing.
When the working coordinates are reversed,
the three-point arc of the workpiece surface
can be realized, which can greatly reduce the
number of teaching points.
To Next Page
Loading...
