Logicube Forensic Falcon

PRINTER SETUP
Logicube Forensic Falcon™ User’s Manual 151
For example, to add the networked HP Color LaserJet 3600, type the following:
printer add -n 3600 -N -u "socket://192.168.1.158" -m "HP Color LaserJet 3600"
The CLI should respond with: Command (DbPrinterConfig) Successful
8. To save the printer configuration, db save printer.db (or you can use
any name.db you prefer) then press the enter key. A “Successful”
message should appear.
9. Type db load printer.db to load the database configuration. Each time
the Falcon is turned on, the local or networked printer should be
available on the Falcon’s touch screen.