Active Deterrence12
Lorex Active Deterrence cameras feature bright, customizable warning lights and remote-trig-
gered sirens. The recorder allows you to customize automatic light-triggering when motion is de-
tected to deter intruders (see 12.1 Automatic Deterrence Settings, page 38). You can also trigger
the lights and sirens manually using the recorder or Lorex connectivity software (see 12.2 Man-
ually Activate Deterrence Features, page 39).
For a complete list of compatible deterrence cameras, navigate to your recorder series at
lorex.com/compatibility.
12.1 Automatic Deterrence Settings
Set preferences for automatic warning light triggering on compatible Lorex deterrence cameras.
To configure deterrence settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click ALARM. Click the MOTION tab on the side panel, then Deterrence on the top panel.
3. Select the channel of a connected deterrence camera.
4. Check Enable.
5. Click Setup next to Warning Light to configure preferences:
• Duration: Choose how long the warning light will stay on when motion is detected.
• Select Warning Light for a solid white light, or Strobe for a flashing light. If you select
Strobe, set how quickly the light will flash under Strobe Frequency.
#LX400111; r. 3.0/56507/56507; en-US 38
To Next Page
Loading...
Need help?
General