Lorex D231A41B User Manual

Using the Main Menu14
6. Choose how the system will react when video loss occurs:
• Show Message: Video loss error message will appear on the recorder’s display.
• Record Channel: Select the numbered tiles next to this option to record video from the
corresponding channels. Set the length of recording following a video loss event in the
Post_REC field.
• PTZ Activation: Set connected PTZ cameras to start a tour, pattern, or go to a preset
location.
• Sequence: Sequence mode will begin. Select the numbered tiles next to this option to in-
clude the corresponding channels in the sequence.
• Snapshot: Select the numbered tiles next to this option to save a snapshot of the corre-
sponding channels.
• Buzzer: The recorder will sound an audible alarm.
• Send Email: Send an email notification with details on the event (requires email configu-
ration — see 14.6.3 Configuring Email Alerts, page 56 for details).
7. Click Apply.
8. (OPTIONAL) Click Copy to apply the settings for the current channel to one or more other
channels (see 14.11 Copying Settings to Another Channel, page 71 for full instructions on us-
ing the copy function).
14.2.3 System Warnings
The system is set to provide warnings for various events and issues. The warning menu is broken
into 2 event types: hard drive events and network events.
To set preferences for hard drive events:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click ALARM. Click the WARNING tab on the side panel, then HardDisk on the top
panel.
3. Choose the event type you want to set preferences for:
• No Disk: No hard drive detected.
• Disk Error: A hard drive error has been detected.
• Disk Full: The hard drive is full or almost full. Enter the percentage of disk space re-
maining that will trigger a warning next to Less Than. Disk Full warnings will not occur
if hard drive overwrite is enabled.
• All: Configure warnings for all hard drive events.
4. Click to enable (
) / disable ( ) the selected event type.
5. Choose how the system will react when the selected event occurs:
• Show Message: Error message will appear on the recorder’s display.
• Buzzer: The recorder will sound an audible alarm.
• Send Email: Send an email notification with details on the event (requires email configu-
ration — see 14.6.3 Configuring Email Alerts, page 56 for details).
6. Click Apply.
#LX400111; r. 3.0/56507/56507; en-US 46

Lorex D231A41B Specifications

General

Brand	Lorex
Model	D231A41B
Category	DVR
Language	English