Using the Main Menu14
3. Under Device Model, select the USB device where you would like to save the configuration.
4. Click Export to save your current system configuration.
14.7.6 Import System Settings from a USB Flash Drive
If you have backed up your system configuration, you can import it to apply all your saved menu
settings.
Prerequisite:
• Connect a USB flash drive (not included) to a free USB port on the unit with an exported sys-
tem configuration (see 14.7.5 Save System Settings to a USB Flash Drive, page 61 for full
details).
To import system settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click SYSTEM, then click the CONFIG BACKUP tab.
3. Under Device Model, select the USB device where a system configuration has been saved.
4. Click the folder with the configuration files you would like to restore. Configuration file
folders are labeled Config and then the time and date the configuration was saved (e.g., Con-
fig_20140425103727).
5. Click Import to save your current system configuration.
14.7.7 Restoring Default Settings
Reset the system to default settings.
To restore default settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click SYSTEM, then click the DEFAULT tab.
3. Check boxes for menus you would like to be reset to default settings, or click Factory De-
fault to reset the unit to its out-of-box state.
4. Click Apply. The system will restart automatically. Do not power down the unit or discon-
nect the power cable.
#LX400111; r. 3.0/56507/56507; en-US 62
To Next Page
Loading...
Need help?
General