Using the Main Menu14
To access the Load menu:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION. Click the NETWORK tab on the side panel, then LOAD on the
top panel.
14.10.7 Network Test
The Test menu allows you to test if your system can connect to other devices over the LAN or
Internet. You can enter the IP address of a device and click Test to determine if your system can
connect to it.
To access the Network Test menu:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION. Click the NETWORK tab on the side panel, then Network Test
on the top panel.
14.10.8 BPS
The BPS menu shows the bitrates of connected cameras. The bitrate is the amount of data the
camera is sending to the system.
To access the BPS menu:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION, then click the BPS tab.
14.11 Copying Settings to Another Channel
Some areas of the main menu allow you quickly copy over the settings from one channel to one
or multiple other channels on the system.
To copy channel settings:
1. Configure at least one channel to your preference.
#LX400111; r. 3.0/56507/56507; en-US 71
To Next Page
Loading...
Need help?
General