90
iPad App
6.1.1 USING 2-WAY AUDIO (INTERCOM)
1. While viewing, touch to activate 2-way-audio (intercom) using the phone
microphone (speaker required; not included).
2. Tap
again to deactivate 2-way-audio.
6.1.2 TAKING SNAPSHOTS
• While viewing, tap to take a snapshot from the camera. You can view snapshots
using the Camera app or save photos to your computer by connecting your iPad to
your computer using a USB cable.
NOTE: There is no Camera app on 1st generation iPads. To view your snapshots, you
must connect the iPad to your computer using a USB cable.
6.1.3 RECORDING VIDEO TO IPAD
You can manually record video from your camera directly to your iPad’s built in memory.
To record video to your iPhone's memory:
1. While viewing, tap
to start recording.
2. Tap
again to stop recording. To view the recorded video, see below.
6.2 PLAYING BACK VIDEO RECORDED TO IPAD
After using the record button to record video to your iPad, you can playback video on
iPad.
To playback video recorded to iPad:
1. Tap the Playback button (
) then tap iPad.
2. Select the camera you would like to playback video from. A lis
t of days with recorded
video appears.
3. Tap a day to see recordings from that day. Tap a recording to start playback.
To Next Page
Loading...
Need help?
General
