Lorex Live LNC100 Series - Editing Camera Wifi Network Settings

79
iPhone App
English
4. Select DHCP (recommended) to allow the camera to automatically obtain an IP
address from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Updat
e t
o save your settings.
5.4.9 EDITING CAMERA WIFI NETWORK SETTINGS
Configure WiFi network settings for the camera. To setup the camera with a WiFi
network, see “iPhone WiFi Setup” on page 23.
To edit camera WiFi settings:
1. In Camera List, tap
next to the camera you would like to edit.
2. Tap Camera
Settings.
3. Tap Netwo
rk then WiFi Network.
4. Slide WiFi to ON to
enable WiFi on the camera and scan for available networks.
5. Tap a WiFi network and enter the password to connect.
• To connect to a hidden WiFi network, tap Other. Ente
r the SSID and select the security
type and tap Add. Tap the network name from the list and enter the password.
6. Wait for the update to complete.
7. Remove the Ethernet cable from the camera. It will connect to the WiFi network.
When it is c
o
nnected, the blue Network LED will be on or flashing.
8. Press Camer
a
Settings then Camera List to exit the edit camera screen.
Slide Wi-Fi to ON
Tap your WiFi network
Tap Other to add a hidden WiFi
network