56
L-View for Mac
6. Split-screen Controls:
• : Click t
o open single camera view.
• : Click to open 4-camera view.
• : Click to open 6-camera view.
• : Click to open the current display in full-screen. Press ESC to exit full-screen.
4.3 CAMERA LIST (MANAGING CAMERAS)
The Camera List is used to save connection information for your cameras, so you don’t
have to re-enter the ID or password each time you connect. It also allows you to
configure certain camera settings (see “Using Camera List to Mod
ify Camera Settings”
on page 59).
4.3.1 ADDING CAMERAS TO CAMERA LIST
• If the camera is on the same network as the computer, click and drag the ID from
the Auto Search List to the camera list. Then right-click the ID and click ID/Password
settings. Enter the camera password. If you want, you can also enter a Camera Name
of your choice for your camera. Click OK.
• If you are adding a camera over the Internet, see “Connecting to your Camera over
the Internet (Mac)” on page 11.
Click and drag camera ID
from Auto Search List to
Camera List
Right-click and select ID/
Password settings
Enter a name of
your choice
Enter the camera
password and click OK
To Next Page
Loading...
