149
Configuring Camera Settings using a Web Browser
English
8.5.1 ADMIN LOGIN
Configure the admin user name and password for the camera. The admin user name and
password are used to login to Web Configure or change settings using apps. Configure
the web access port.
To configure the admin user name and password used to login to Web Configure:
1. Under Username, ent
er the desired admin user name for the camera. The default is
admin.
2. Under Pa
s
sword, enter the desired admin password for the camera. By default, the
password field is left blank when logging in. Repeat the password under Password
confirm.
3. Click Sa
ve & Apply to apply the settings to the camera. Restart the camera by
disc
onnecting and reconnecting the power adapter or pressing the Reboot button
(see “Reboot” on page 153).
To configure the Web access port (advanced users only):
You do not need to change the Web access port unless you have multiple cameras on the
same network and wish to access Web Configuration for them from a remote location
(i.e. over the Internet).
If you wish to access Web Configuration over the Internet, you must port forward the Web
access port on your router to the camera’s IP address (see your router’s instruction
manual for details), and connect to http://, the public IP address of the camer
a, colon
(:), and the camera’s web access port (e.g.
http://245.54.112.12:80
).
To Next Page
Loading...
