60
L-View for Mac
4.5.1 QUALITY TAB (CONFIGURE BANDWIDTH, RESOLUTION, AND
FRAME RATE)
The Quality tab allows you to configure image quality settings such as the camera
resolution, frame rate, and bandwidth settings.
Select Internet connection speed
Check to automatically adjust resolution and
frame rate based on bandwidth available
Select Resolution
Select Frame Rate
Select how image quality will be affected
when bandwidth is low
To configure image quality settings:
1. Right-click on the camera in Camera List and select Video settings. Sele
ct the
Quality tab.
2. Under Bandwidth, sel
e
ct the speed of your Internet connection. If your Internet
connection is faster than 1.5Mbps, select 1.5Mbps.
3. Check Sel
e
ct the best resolution and frame rate automatically to have the camera
automatically adjust the resolution and frame rate based on bandwidth. Or, un-check
it to manually configure the resolution and frame rate. If you are manually
configuring the resolution and frame rate, configure the following:
• Resolution: M
a
nually select either (640x480) VGA, (320x240) QVGA, or
(160x120) Q2VGA resolution. VGA resolution will give you a better, more detailed
picture, but requires more bandwidth. QVGA and Q2VGA allow the camera to maintain
a higher frame rate when available bandwidth is low.
• Frame rate: Manually select the frame rate between 30fps (highest) and 1fps (lowest).
30fps is real time video, meaning that movement in the image will appear smooth,
with no choppiness.
To Next Page
Loading...
Need help?
General
