Lorex Live LNC100 Series - Configuring Camera Settings using a Web Browser

133
Configuring Camera Settings using a Web Browser
English
8. CONFIGURING CAMERA SETTINGS
USING A WEB BROWSER
Web Configure lets you modify camera settings using a web browser.
To access Web Configure:
1. Open L-View, right-click on the camera
ID under Auto Search, and click Web
configure.
Right-click the camera under Auto Search
and click Web Configure
NOTE: Your computer must be on the same network as the camera to use Web
Configure.
2. Enter the camera admin user name and password. By default, the admin user name
is admin and the admin pas
sword field is left blank. Click Log in. The Web Configure
interface opens in your default web browser.
NOTE: Your camera admin user name and password differs from the password used to
connect to your camera to view video.